Best Epoxy Resin For Table Diy
1.3 Kg Epoxy Art Resin And Hardener For Craft Working
High Gloss Table Top epoxy art resin clear coat will make your piece strong, safe and standout.
Usage Ratio: 1 Resin : 0.3 Hardener
Art Resin: 1000 gms
Hardener: 300 gms
Mix together equal parts from each bottle, stirring for 3 minutes. Then just pour the liquid mixture over your project and spread.
Leave it to dry for 24 hours and then love it forever!
Steps (4 simple & clear steps):
Wear gloves and pour the ratio amount of art resin and hardener in a mixing container.
TIP – Mix up a little more than you think you’ll need because you want to completely cover your work in one shot and not have to mix later.
Stir it really well and thoroughly to make sure that both liquids are mixed properly. Scrape off any liquid on the mixer. Any unmixed material will leave you with sticky spots that just won’t cure. It takes approximately 45 minutes for the mix to thickens so you have this much working time.
After mixing properly, now is the time to pour the liquid. When you pour it, it will make its spread slowly. Let it run up to edges and once it slows down, use any brush to fill up the leftover places. Once you pour, you will see bubbles will begin to rise to the surface. You can also pop them yourself for a flawless finish but many of these will pop on their own.
Waiting time is 72 hours before you can actually see the result. Keep your project in dust-free place. In almost 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.
- Instruction Manual: This is a new hardener which
needs to be mixed in 1 (Resin): 0.3 (Hardener)
The quantity of Resin is 1000ml and
The hardener is 30
- 0 ml
Note: Packing is bigger than the liquid in it. If you feel liquid is less, please check it.
If you are searching where to buy resin?
The answer is Thestationers.pk sell 100% pure resin and hardener in Pakistan.